Customized Size and Material Torispherical Heads Tank Caps Dish Ends Pressure Vessel Heads
PRODUCT DETELS
When it comes to torispherical heads, tank caps, or dish ends for pressure vessel heads, customization in size and material is often required to meet specific project requirements. Here's some information to guide you:
-
Size Customization:
- Torispherical heads can be customized to meet the specific size requirements of the pressure vessel or tank.
- The dimensions of the dish radius (r) and the knuckle radius (k) can be adjusted based on the vessel's diameter (D) and the desired dish depth.
- Customization allows for precise fitting and integration with the pressure vessel or tank design.
-
Material Customization:
- The choice of material for torispherical heads depends on factors such as the operating conditions, desired mechanical properties, and compatibility with the process fluid.
- Common materials used for torispherical heads include carbon steel, stainless steel, and other alloys suitable for pressure vessel applications.
- The specific material selection should consider factors such as corrosion resistance, temperature resistance, and mechanical strength requirements.
-
Manufacturing and Fabrication:
- Customized torispherical heads are typically manufactured through forming processes such as cold pressing or hot forming, using hydraulic or mechanical presses.
- The manufacturing process should adhere to relevant codes and standards, ensuring proper dimensions, tolerances, and material properties.
- Quality control measures, including dimensional checks, visual inspections, and non-destructive testing, should be carried out to ensure compliance with the required specifications.
-
Engineering Consultation:
- To ensure the customization of torispherical heads meets all necessary requirements, it is recommended to consult with a qualified engineer or pressure vessel design professional.
- The engineer can provide guidance on material selection, dimensions, and fabrication methods based on the specific application and relevant codes and standards.
It is important to work with reputable manufacturers or suppliers who have experience in producing custom torispherical heads or dish ends for pressure vessels. They should have knowledge of applicable codes and standards, along with the capability to deliver high-quality products that meet your specific requirements.
SPECIFICATIONS
| Brand Name: | HaiQun |
| Diameter: | 89mm--10000mm |
| Thickness: | 2mm--300mm |
| Reduction Ratio: | about 10% |
| Material: | Carbon Steel, Stainless Steel, Duplex, Super Duplex, Aluminum, Nickel and Nickel Alloys, Copper and Copper Alloys, Titanium and Its Alloys, Zirconium and all cladded material combinations. |
| Forming method: | Hot forming,cold forming |
| Surface Treatment: | Sand Blasting,Pickling,oil,discaling |
| Inspection: | UT,RT,MT,PT,TOFD. |
| Applicable Standard: | ASME ,PED and GB |
| Certificate: | ISO9001,ISO45001,OHSAS18001 |
| Applications: | Such as oil, chemical industry, water conservancy, electric power,
boiler, machinery, metallurgy, sanitary construction etc. |
| Package: | Wooden cases ,wooden pallet,Steel pallet or as per customers requirement |
| Customized Product: | Available |
| Material | Carbon Steel; Stainless Steel; Special Steel |
| Size | 50-10000mm |
| Thickness | 2mm--300mm |
| Surface Treatment | 1. Intermediate & Final stage Heat Treatments;
2. Sand / Shot Blasting after Heat Treatment;
3. Weld Edge Preparation (Manual & Machined) |
| Reduction ratio | About 10% |
| Certificate | ISO9001 |
| Technology | 1. Cold & Hot forming;
2. Hot Pressed Hemispheres and Cold Formed Segmental Hemispheres; |
| Applicable standard | ANSI, ASME, MSS, API, DIN, JIS, BS. AWWA |
| Test | 1. Liquid Penetrant Examination;
2. Ultrasonic Testing;
3. 100% Radiography Testing of weld seams;
4. Magnet Particle Examination;
5. Inspection under various Third party Inspection Agencies
6. NDT( after forming): DPT, RT, MPI, UT;
7. NDT: 100% DPT, UT & RT OF weld joint |
| Connection | Welding |
| Application | Pressure vessel |
PRODUCTS
FAQ
Q: Why choose us?
A: Our company has been in the header manufacturing business for more than thirty years. We have rich international experience and professionalism, and we can provide customers with a variety of high-quality header products.
Q: Can we provide OEM/ODM service?
A: Yes.Please feel free to contact us for further details.
Q: What are your terms of payment?
A: One is to telegraphic transfer 30% of the deposit before production the remaining 70% to the copy of the bill of lading;The other is an irrevocable 100% sight L/C
Q: Can we visit your factory?
A: A warm welcome.Once we have your itinerary we will arrange for a professional sales team to follow up your case.
Q: Can you provide samples?
A: Yes,the sample of general size is free of charge,but the buyer needs to pay the shipping fee.
Product Tags:
|
|
OEM / ODM Torispherical Dished Head Tank Caps Dish Ends Customized Images
|
